Skip to main content
Full Spectrum Hyperspectral Data

The AisaFENIX 1K is a full spectrum hyperspectral camera ideal for remote sensing of the environment and other aerial survey applications.

This hyperspectral sensor features 1024 spatial pixels, enhancing the productivity of hyperspectral imaging to an entirely new level. Producing the same top quality full spectrum data as the AisaFENIX, it also simultaneously reduces flight costs by approx. 60% due to the requirement of less flight lines.

AisaFENIX Flight Image

Covering a 10 Km² area at 1m GSD, 30% side lap, 120 kts ground speed and 3 minute turns required 3 hours and 46 minutes with the AisaFENIX. With the AisaFENIX 1K, total time required was reduced to 1 hour and 29 minutes, which is approximately 40% lower! Considering half of this required time was spent in turns, reduction of cost for flying is even more pronounced if the form of the area of gyro stabilization allows for planning for less flight lines.

AisaFENIX 1K Technical Specifications
Camera ModuleVNIRSWIR
SpectrographHigh efficiency transmissive imaging spectrographHigh efficiency transmissive imaging spectrograph
Spectral range380-970 nm970-2500 nm
Spectral resolution4.5 nm14 nm
F/#F/2.4F/2.4
Smile/ Keystone± 0.35 pixels± 0.35 pixels
Polarization sensitivityThroughput practically independent of polarizationThroughput practically independent of polarization
CalibrationSensor provided with wavelength and radiometric calibration fileSensor provided with wavelength and radiometric calibration file
Signal-to-noise ratio (peak)600-1000:11250:1
Spatial resolution1024 pixels1024 pixels
Frame rateUp to 100 HzUp to 100 Hz
Integration timeAdjustable, within frame rateAdjustable, within frame rate
FOV 40°40°
IFOV0.039°0.039°
Swath width0.73 x altitude0.73 x altitude
Altitude for 1m pixel size1400 m1400 m
Electro mechanical shutterYesYes
Optics temperature stabilizationYesYes
DetectorCMOSStirling cooled MCT
Spectral binning options2x, 4x, 8x-
Number of spectral bands348, 174, 87256
Spectral sampling/ band1.7nm, 3.4nm, 6.8nm6.3nm
Data interfaceCameraLink 12-bitCameraLink 16-bit
Operating modesHyperspectral and Multispectral - operator can create application specific band configurations and quickly change from one mode/config to others in flight modeHyperspectral and Multispectral - operator can create application specific band configurations and quickly change from one mode/config to others in flight mode
Typical power consumption150 W150 W
Maximum power consumption500 W500 W
SizeSensor: 530 x 530 x 210 mmDPU: 300 x 260 x 195 mm
WeightSensor: 22.5 kgDPU: 9.5 kg
Storage temperature-20 - +50°C-20 - +50°C
Operating temperature+5 - +40°C, non-condensing+5 - +40°C, non-condensing